The problem of fire in mobile house is caused by the aging of the circuit in many cases. Most of the lines of the movable room are installed inside the wall board in advance, and only part of the outer part of the wall is provided with sockets and switches. The house will be repaired after a period of time, but it still can not find all the problems of the circuit, so it will still be a problem. The circuit of the movable house is basically hidden, so the wire will choose the higher quality, and it can be used for a long time. Some mobile housing installation company responsibility is not high, in the construction of Jerry building, the use of quality does not meet the standards of the materials, so that the probability of housing problems will increase,

And most of the time after the problem occurred, it was found that the material did not meet the standards.

In order to avoid the real fire situation, the first is to choose a relatively good reputation of the real manufacturers, and is the best choice in fire well good real km materials, is not for a moment of cheap buried fire hazard. And now there are many new types of movable rooms on the market, such as the container modification room, which is a representative activity room with high performance. Container transformation of the housing are generally use some EPS self extinguishing core material to use it as a wall, fire ability is very good, in case of fire wall will not burn occurs, can effectively avoid the fire more and more serious. But this kind of container transformation and real circuit is directly laid on the wall outside of the line, it is very convenient to check, if there is a problem to be solved immediately, do not wait until things have happened in the future to remedy. It is precisely because the container modification room has these two characteristics, effectively reducing the risk of fire, it is obviously more prominent in the fire prevention.